Roofing Contractor in Bay Head, NJ

Bay Head is an affluent, historic shore town at the north end of the barrier island, known for its shingle-style Victorians, yacht club, and quiet beaches. It grew as a rail-era summer resort after 1879, incorporated out of Brick Township in 1886, and now holds a National Register historic district of more than 550 buildings, one of the largest in the state. A buried 1870s seawall helped it weather Sandy far better than its neighbors. Its housing is large Victorians and custom homes between the ocean and the bay, with detailed rooflines and barrier salt exposure both shaping the work.

CRS handles all of it, from a shingle-style Victorian to a custom oceanfront home. Here is what matters for a roof in Bay Head.

Your Roofing Contractor in Bay Head, NJ

CRS provides roof replacement, roof repair, roof restoration, emergency roofing, and protection plans across Bay Head and the rest of Ocean County. Every residential project begins with a free written inspection and a workmanship guarantee in writing.

How Much Does a Roof Cost in Bay Head? (2026)

Most Bay Head homes run $18,000 to $32,000 for a full architectural-shingle replacement in 2026, depending on size, pitch, and roofline. Large oceanfront and historic Victorians with copper and slate run well higher. The figures below are planning ranges, not a quote.

Oceanfront and historic Victorian homes carry a premium for copper or rated salt-air flashing, slate or slate-look matching, and wind-rated fastening.

Want your Bay Head number? A free CRS inspection gives you a written report with photos and a real range for your exact roof. Request your free inspection.

Bay Head Roofing Context

Bay Head’s housing is historic and exclusive. Shingle-style and Queen Anne Victorians, many over a century old, sit alongside large custom homes between the Atlantic and Barnegat Bay. The steep, detailed rooflines, often finished in slate and copper, and the barrier-island salt both put the cost of a roof into the material and the flashing.

Two forces shape the work. The Victorians have steep pitches, turrets, and many transitions, each a flashing point, and slate is common. And the barrier island brings severe salt and wind, so copper or rated flashing is the standard. New Jersey’s 8 to 12 freeze-thaw cycles a winter are hard on flashing and slate alike, and the 2025 to 2026 season was the snowiest North Jersey since 2013 to 2014, so many of this spring’s leaks trace back to winter ice.

A fair estimate in Bay Head specifies copper or properly woven step flashing at every transition, slate or slate-look matching where it fits, ice-and-water shield, wind-rated fastening for the barrier exposure, and a deck-repair allowance, with historic detail respected. You can verify any New Jersey roofer through the NJ Division of Consumer Affairs before you sign.

Do You Need a Repair or a Full Replacement in Bay Head?

Most leaks in Bay Head start at the many flashing transitions on the Victorians and at slate details, and on the oceanfront at corroded metal first. A targeted copper or slate repair often holds. We would rather earn your trust with an honest repair now and your replacement when you actually need it.

Bay Head Roof Inspection Checklist

• Historic flashing audit. The shingle-style Victorians have steep pitches, turrets, and many transitions, so we inspect each flashing detail separately, not just the open field.
• Slate and copper condition. We check slate and copper and price the right material into a selective repair or replacement.
• Oceanfront salt and wind. On the barrier island we check flashing for corrosion and confirm wind-rated fastening and edge details.
• Decking probe. The century-old Victorians can hide soft or board-sheathed decking, so we probe for rot and document any repair before quoting.
• Coastal storm and ice stress. After coastal storms and New Jersey freeze-thaw winters, we lift perimeter tabs and check eave and valley ice-and-water protection.

For code and permit questions, the NJ Division of Codes and Standards is the authority, current storm data comes from the National Weather Service, wind-resilience research comes from the Insurance Institute for Business and Home Safety, and shingle specifications are published by manufacturers such as GAF.